Skip to content

Panda Lux

Product Profile

The Panda Lux is a high-brightness LED light bar specially designed for Bambu Lab P1/X1 series printers. It provides bright illumination for the print area, allowing users to easily monitor the printing process and quickly identify any issues.

Feature Highlight

  • High-Level Brightness: 31 LEDs and 6000K color temperature provide clear illumination for the print area.
  • Front-Facing Illumination: Front-facing design avoids direct light into the eyes, reducing glare and protecting eyesight.
  • Magnetic Installation: Easy to install with magnetic mounting, no tools required.
  • Original Screen Control: Control the Panda Lux via the printer's original screen for seamless integration.
  • Aluminum Alloy Housing: High-quality aluminum alloy housing ensures efficient heat dissipation and extends the LED light's lifespan.
  • Compatibility: Compatible with Bambu Lab P1/X1 series printers.


Voltage 5V
Color Temperature Pure White, 6000K
Waterproof No
Lifespan Up To 36,000 Hours
Cable Length 100mm
Compatibility For Bambu Lab X1/P1 Series Printers


Packaging List

Installation Instructions

The following instructions use the Bambu Lab P1P as an example.

Step 1: Attach the Panda Lux to the underside of the printer's front door frame, centering it in place.

*The Panda Lux has built-in magnets that allow for easy installation. For additional reinforcement, double-sided adhesive tapes are included in the package but are not required.

Step 2: Remove the protective cover off of the AP board if you are installing on a P1 printer (USB port PCB) or open the plastic cover on the right side of the frame if you are installing on a X1 printer.

Step 3: As shown in the image, route the Panda Lux cable along the edge seam to the top.

*For additional stability to prevent the cable from moving, use the electrical tape provided in the package to secure the cable firmly to the door frame.

Step 4: Disconnect the stock light bar connector from the AP board.

Step 5: Connect the Panda Lux cable connector on the adapter board.

Step 6: Peel off the double-sided tape on the bottom of the adapter board and stick it on a suitable location.

Step 7: Insert one end of the connection cable into the AP board's stock light bar port, and insert the other end of the connection cable into the adapter board.

Note: The stock lightbar connector location on X1 series is on the left side of the frame behind the plastic cover.

Step 8: Install the protective cover back onto the AP board (close the plastic cover for X1 printers).

Installation Tutorial

If you experience any issues with this product, please contact us and submit a support ticket.

BIQU Official Website:

BIGTREETECH Official Website:

Online Store:


Back to top