EZ2130¶
Product Profile¶
EZ2130 is a high-performance two-phase stepper motor driver chip with a standard SPI interface and a simple step/dir interface. Very low noise, high load driver does not lose step.
Product Link: https://biqu.equipment/products/ez-drive-easy-driver-ez2209-ez5160-pro-v1-0?variant=39789010321506
Features Highlights¶
- Up to 256 subdivisions;
- Support SPI interface control;
- Do not lose step when driving under high load;
- Logic voltage: 3.3V/5V;
- Input voltage range: 12V/24V DC;
- Motor operating current 1.2a (peak 2A) can be adjusted;
- Spreadcycle ensures that the stepper motor has a smooth transition without dead zone current when passing zero.TMC2130 stepper motor driver chip has almost no jitter;
- StealthChop can drive the motor to work under extremely quiet sound, so it can be controlled the noise of the motor is below 10dB, which is much lower than that of the traditional current controllerType;
- SpreadCycle PWM chopped mode is automatically divided between slow and fast attenuators setting up a hysteresis attenuation function, the average current reflects the configured normal current in sine there will be no transition period at the zero crossing of the sine, which reduces the current and torque fluctuations that make the current waveform more similar to the sine wave. Compared with the traditional constant chopper mode of SpreadCycle PWM, the motor operates more smoothly and stably;
Specifications¶
- Highest Resolution 256 microsteps per full step
- Step/Dir Interface with microstep interpolation
- microPlyer™ SPI Interface
- stealthChop™ for extremely quiet operation and smooth motion
- spreadCycle™ highly dynamic motor control chopper
- coolStep™ current control for energy savings up to 75%
- Voltage Range 12V/24VDC
- Passive Braking and freewheeling mode
- Full Protection & Diagnostics
Dimensions¶
Interface Diagram¶
The direction of installing the EZ version driver to the new header is shown in the image below:
| J1 | Function | J2 | Function |
| 1 | (EN)Enable | 1 | (VM)Motor Supply Voltage |
| 2 | (SDI/CFG1)Data | 2 | (GND)GND |
| 3 | (SCK/CFG2)Clock | 3 | (B2) B Phase |
| 4 | (CSN/CFG3) Chip Select | 4 | (B1) B Phase |
| 5 | (SDO/CFG0) Data | 5 | (A1) A Phase |
| 6 | (DIAG) Locked-Rotor Detection | 6 | (A2) A Phase |
| 7 | (STEP) Pulse Input | 7 | (VIO) Logic Voltage |
| 8 | (DIR) Direction Input | 8 | (GND) GND |
Software Configuration¶
For details, please click:
https://bigtreetech.github.io/docs/TMC2130.html#software-configuration
Product Purchase Link¶
Purchase Link:
https://biqu.equipment/products/ez-drive-easy-driver-ez2209-ez5160-pro-v1-0?variant=39789010321506
If you have any issues with the product, please submit a support ticket.
https://biqu3d.com/pages/submit-a-ticket
Navigation:
BIQU Official Website： http://biqu3d.com
BIGTREETECH Official Website： http://bigtree-tech.com
Online Store： https://biqu.equipment
BIGTREETECH Official Group: https://www.facebook.com/groups/bigtreetech
Discord: https://discord.gg/hhZsV7zk